Kobra +3 CC4

Özellikler

KOBRA +3 CC4 EVRAK İMHA MAKİNESİ                 TEKNİK ŞARTNAMESİ

1. MAKİNELERİN KAĞIT KESME BIÇAKLARI ÖZEL SERTLEŞTİRİLMİŞ ÇELİKTEN OLMALI; ATAŞ TEL ZIMBA TOPLU İĞNELERE DAYANIKLI OLMALIDIR.
2. MAKİNEYE YANLIŞ VERİLEN EVRAKLAR, GERİ ALMA TUŞU İLE GERİ ALINABİLMELİDİR.
3. MAKİNEYE FAZLA KAĞIT YÜKLENMESİ DURUMUNDA OTOMATİK OLARAK GERİ ÇALIŞACAK VE SİSTEME ZARAR VERMEYECEKTİR.
4. MAKİNE, KAĞIDI GÖRDÜĞÜNDE OTOMATİK ÇALIŞABİLMESİ İÇİN, ELEKTRONİK SENSOR DİZAYNINA SAHİP OLMALIDIR.
5. MAKİNENİN MOTOR GÜCÜ EN AZ 250 WATT OLMALIDIR.
6. MAKİNENİN KAĞIT KESİM ÖLÇÜSÜ EN AZ 3,5 x 40MM VE ÇAPRAZ KESİM OLMALIDIR.
7. MAKİNE AYNI ANDA EN AZ 12/14 ADET (A4 70gr/ m²) KAĞIT İMHA EDEBİLMELİDİR.
8. MANENİN GÜRÜLTÜ DERECESİ EN FAZLA  55  dba OLMALIDIR.
9. MAKİNENİN ATIK DEPO KAPASİTESİ EN AZ  38,5  LT OLMALIDIR.
10. MAKİNENİN KAĞIT BESLEME AĞIZ GENİŞLİĞİ EN AZ 230 MM
11. MAKİNENİN GİZLİLİK DERECESİ DIN 32757 STANDARDINDA EN AZ 3 OLMALIDIR.
12. MAKİNA CD ROM, KREDİ KARTI, BURUŞUK KAĞIT GİBİ MATERYALLERİ İMHA EDEBİLMELİDİR.
13. MAKİNENİN ATIK DEPOSU MAKİNEDEN AYRILABİLİR ÖZELLİKTE OLMALI, ATIK DEPOSU ÇIKARILDIĞINDA MAKİNE STOP ETMELİDİR.
14. MAKİNENİN ATIK DEPOSU KOVA ŞEKLİNDE OLMALI VE AYRICA ATIK TORBASINA İHTİYAÇ DUYMAMALIDIR.
15. MAKİNENİN AĞIRLIĞI EN FAZLA 14 KG OLMALIDIR
16. MAKİNE BOYUTU ESTETİK AÇIDAN BURO ORTAMINA UYGUNLUK SAĞLAYACAK BİÇİMDE EN AZ W:39, D:30, H:59 CM ÖLÇÜLERİNDE OLMALIDIR .
17. MAKİNENİN MOTORUNUN ISINMAMASI İÇİN HAVALANDIRMA SİSTEMİ OLMALIDIR.
18. MAKİNE AVRUPA ÜYE ÜLKELERİNDEN BİRİNİN ÜRETİMİ VEYA TÜRK MALI OLMALIDIR.
19. FİBER OPTİK SİSTEMİ İLE ENERJİ SMART ÖZELLİĞİNE SAHİP OLMALIDIR.

THE TECHNICAL SPECIFICATION OF KOBRA 260 CC4 PAPER SHREDDER

1. THE CUTTING BLADES MUST BE MADE FROM PRIVATELY HARDENED STEEL AND THEY MUST BE UNAFFECTED BY STAPLES, PINS AND  CLIPS.
2. THE DOCUMENTS WHICH WERE GIVEN MISTAKENLY MUST BE TAKEN BACK WITH REVERSE BUTTON.
3. THE MACHINE MUST START/STOP AUTOMATICLY THROUGH ELECTRONIC EYES WITH STAND-BY FUNCTION AND HAVE A SYSTEM SAVES ENERGY.
4. THE HOUSING AND THE STORE OF THE MACHINE MUST BE METAL WHEREAS THE ENGINE BONNET PARTS MUST BE MADE FROM HARD PLASTIC, AESTETIC AND MUST REDUCE THE SOUND DURING THE OPERATION.
5. THE VOLTAGE OF THE MACHINE IS 230 AND IT HAS TWO MOTORS WHICH HAVE 2X460 WATT POWER.
6. CUTTING SIZES OF THE PAPERS MUST BE 3,5 X 30 MM AND CROSS-CUT
7. THE MACHINE MUST SHRED AT LEAST 22/24 SHEETS (A4 70GR/M2) AT A TIME.
8. THE NOISE LEVEL MUST BE MAXIMUM 61 dba
9. WASTE BAG VOLUME OF THE MACHINE MUST BE 65 LT.

10. THE THROAD WIDTH MUST BE AT LEAST 260 MM
11. THE SECURITY LEVEL OF THE MACHINE MUST BE AT LEAST AT 3 DIN STANDARD.
12. THE MACHINE MUST SHRED HARD ITEMS SUCH AS; CD ROM, FLOPPY DISC, CREDIT CARD, TYPEWRITER RIBBON, AND FILM STRIP.
13. THE MACHINE MUST STOP AUTOMATICALLY WHEN ITS DOOR IS OPENED.
14. THE MACHINE MUST STOP AUTOMATICALLY WITH A WARNING LIGHT SIGNAL WHEN THE WASTE BAG IS FULL.
15. THE ENGINE SPEED MUST BE 0,07 M/SEC. AND IT MUST HAVE THE CAPACITY OF 24 HOURS CONTINUOUS DUTY.
16. THE MACHINE MUST SEND THE SHREDDED MATERIALS TO THE PLASTIC BAG.
17. THE MAXIMUM WEIGHT OF THE MACHINE MUST BE 35 KG.
18. THE DIMENSIONS OF THE MACHINE REGARDING THE AESTETIC APPEARANCE MUST BE AT LEAST 43X31X70 CM IN ORDER TO SUIT TO THE OFFICE CONDITIONS.
19. THE MACHINE MUST HAVE A VENTILATION SYSTEM IN ORDER TO AVOID OVERHEATING OF THE ENGINE.
20. THE MAIN GEAR IN THE ENGINE MUST BE STEEL AND THE MECHANISM WHICH ROTATES THE GEARS MUST HAVE A SUPER POTANTIAL POWER UNIT WHICH IS MADE FROM CHAIN.
21. THE MACHINE MUST BE CABINET WHICH IS MOUNTED TO THE WHEELS.
22. THE MACHINE MUST HAVE THE ISO QUALITY CERTIFICATE
23. THE MACHINE MUST BE THE PRODUCTION OF A COUNTRY WHICH IS A MEMBER OF EUROPEAN CONTRIES.